web analytics

rebooted and moved to another cluster node. Which tool should you use?

You have a failover cluster named Cluster1. A virtual machine named VM1 is a highly available virtual machine that runs on Cluster1. A custom application named App1 runs on VM1.

The solution must move VM1 to a different node if the Print Spooler service on VM1 stops unexpectedly. Which tool should you use?

Note: This question is part of a series of questions that use the same similar answer choices. An answer choice may be correct for more than one question in the

You have an application named App1. App1 is distributed to multiple Hyper-V virtual machines in a multitenant environment. You need to ensure that the traffic is distributed evenly among the virtual machines that host App1. What should you include in the environment?

You have an application named App1. App1 is distributed to multiple Hyper-V virtual machines in a multitenant environment. You need to ensure that the traffic is distributed evenly among the

You have an Active Directory domain named Contoso.com. The domain contains servers named Server1 and Server2 that run Windows Server 2016. You install the Remote Access server role on Server1. You install the Network Policy and Access Services server role on Server2. You need to configure Server1 to use Server2 as a RADIUS server. What should you do?

You have an Active Directory domain named Contoso.com. The domain contains servers named Server1 and Server2 that run Windows Server 2016. You install the Remote Access server role on Server1.

You connect both servers to the iSCSI target and format the shared storage. You need to add the shared storage to the cluster. The solution must ensure that virtual machines running on both nodes can access the shared storage simultaneously. Which tool should you use?

Note: This question is part of a series of questions that use the same similar answer choices. An answer choice may be correct for more than one question in the

You have a server named Server1 that runs Windows Server 2016. You install the Docker daemon on Server1. You need to configure the Docker daemon to accept connections only on TCP port 64500. What should you do?

You have a server named Server1 that runs Windows Server 2016. You install the Docker daemon on Server1. You need to configure the Docker daemon to accept connections only on

You have a server named Served that runs Windows Server 2016. Server1 will be used as a VPN server. You need to configure Server1 to support VPN Reconnect. Which VPN protocol should you use?

You have a server named Served that runs Windows Server 2016. Server1 will be used as a VPN server. You need to configure Server1 to support VPN Reconnect. Which VPN

You have a server named Server1 that runs Windows Server 2016. You need to configure Server1 as a multitenant RAS Gateway. What should you install on Server1?

You have a server named Server1 that runs Windows Server 2016. You need to configure Server1 as a multitenant RAS Gateway. What should you install on Server1? A. the Network

You have a Nano Server named Nano1. Which cmdlet should you use to identify whether the DNS Server role is installed on Nano1?

You have a Nano Server named Nano1. Which cmdlet should you use to identify whether the DNS Server role is installed on Nano1? A. Find-NanoServerPackage B. Get-Package C. Find-Package D.

You need to migrate the storage on VM1 to Cluster1. Which tool should you use?

Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in

You need to perform a Test Failover of VM1. Which tool should you use?

Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in

You need to ensure that VM1 and VM2 can communicate with each other only. The solution must prevent VM1 and VM2 from communicating with Server1. Which cmdlet should you use?

You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 has two virtual machines named VM1 and VM2. You discover that VM1 and VM2 can communicate with

You need to use resource metering to track the amount of network traffic that VM1 sends to the 10.0.0.0/8 network. Which cmdlet should you run?

You have a Hyper-V host that runs Windows Server 2016. The host contains a virtual machine named VM1. VM1 has resource metering enabled. You need to use resource metering to

What are two possible ways to achieve the goal? Each correct answer presents a complete solution.

You have a server named Server1 that runs Windows Server 2016 and has the Hyper-V server role installed. On server1, you plan to create a virtual machine named VM1. You

Which two cmdlets should you run on Server1? Each correct answer presents part of the solution.

You have a server named Server1 that runs Windows Server 2016. Server1 has Internet connectivity. You have a Nano Server image. You need to download and save a Nano Server

You need to install the DNS Server role on Server1. What should you run?

You have a server named Server1 that runs Windows Server 2016. You need to install the DNS Server role on Server1. What should you run? A. the Install-Package cmdlet B.

Which two commands should you run? Each correct answer presents part of the solution.

You have a server named Server1 that runs Windows Server 2016. The Windows Server 2016 installation media is mounted as drive D. You copy the NanoServerImageGenerator folder from the D:\NanoServer

You have a security policy that states that new servers should run Nano Server whenever possible. Which server role can be deployed on a Nano Server?

Your network contains a new Active Directory domain named contoso.com. You have a security policy that states that new servers should run Nano Server whenever possible. Which server role can

What should you do to prepare the data volume on HRServer5 to store the databases required for the human resources application?

Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different

You need to modify the Hyper-V cluster to meet the load balancing requirement for the virtual machine. Which command should you run?

Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different

You need to ensure that you can use nested virtualization on VM1. What should you run on Server1?

Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in

You need to reduce the amount of disk space used by the VHD. What should you run?

Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in

Which command should you run before you enable Storage Space Direct?

You have four servers named Server1, Server2, Server3, and Server4 that run Windows Server 2016. Each server has a single 4-TB SATA hard disk. To each server you attach a

You need to create highly available storage spaces that connect to directly attached storage on the hosts. Which cmdlet should you use?

Your network contains three Hyper-V hosts. You add all of the hosts to a cluster. You need to create highly available storage spaces that connect to directly attached storage on

You need to configure VM01 to move to Node2 automatically if Node1 becomes unavailable. What should you do?

You have a Windows Server 2016 Hyper-V failover cluster that contains two nodes named Node1 and Node2. On Node1, you create a virtual machine named VM01 by using Hyper-V Manager.

You need to ensure that you can perform the migration of VM1 to Server2. What should you do?

You have an Active Directory domain named Contoso.com. The domain contains servers named Server1, Server2 and Server3 that run Windows Server 2016. Server1 and Server 2 are nodes in a

You need to remove Disk3 from Pool1. Which two commands should you run? Each correct answer presents part of the solution.

You have a server that runs Windows Server 2016. The server contains a storage pool named Pool1. Pool1 contains five physical disks named Disk1, Disk2, Disk3, Disk4, and Disk5. A

You need to ensure that containers that run on VM1 can obtain IP addresses from DHCP. What should you do?

You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 has a virtual machine named VM1. VM1 is configured to run the Docker daemon. On VM1, you

Solution: You create a system configuration information data collector. Does this meet the goal?

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals.

Solution: You create a performance counter alert data collector. Does this meet the goal?

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals.

Solution: You create a performance counter data collector. Does this meet the goal?

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals.

Solution: You create a software installation package, and then you publish the package to the virtual machines by using a Group Policy object (GPO). Does this meet the goal?

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals.

Solution: From a Group Policy object (GPO), you create an application control policy, and then you apply the policy to the virtual machines. Does this meet the goal?

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals.

Solution: You use Windows PowerShell Desired State Configuration (DSC) to create a default configuration, and then you apply the configuration to the virtual machines. Does this meet the goal?

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals.

Solution: You configure the network cards to be on the same subnet and to have static IP addresses. You configure the cluster to use unicast. Does this meet the goal?

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals.

Solution: You configure the network cards to be on the same subnet and to have dynamic IP addresses. You configure the cluster to use multicast. Does this meet the goal?

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals.

Solution: You configure the network cards to be on the same subnet and to have static IP addresses. You configure the cluster to use multicast. Does this meet the goal?

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals.